+39.0362.682.683 - Mon-Fri 9:00-13:00 / 14:30-18:30
[email protected]
diotti.com Kitchens - Quality Details
22 / 24 mm thick doors
diotti.com Kitchens are equipped with 22 or 24 mm thick doors according to the model. Classic models come with frame solid wood doors, 24 mm thick. Contemporary models instead come with 22 mm thick doors and are made of MDF or particle wood panels coated in laminate, melamine or pvc, they can also be chosen in a wide selection of matt or hi gloss lacquered colours.
Doors often undergo a certain amount of stress during the use: such a thickness guarantees a definitely longer life-span compared to kitchens with 18 mm thick doors.
Cabinets also come with structure and shelves in melamine, 18 mm thick, and MDF back panel, 5 mm thick.
Soft closing hinges
All kitchen doors are equipped with Blum soft closing hinges, the chosen model is Clip Top Blumotion, characterised by an innovative technique which allows to gently move the door and close it softly.
Wall units with plate rack are equipped with 155° opening soft closing hinges for a practical and convenient use of the plate rack. All other wall units, cabinets and columns come with a standard 110° opening. Thanks to the qualified "Clip" technique the hinges front can be assembled and removed quickly. Furthermore, the Blumotion system can be easily deactivated through a small lever placed on the hinge front.
Tandembox and Blumotion Drawers
diotti.com kitchens are equipped with Antaro Blum drawers and baskets in Orion grey colour with h.11,5 cm sides, Tandembox structure and Blumotion soft closing system.
The lift-off runners allow for a dynamic load of 30 / 50 / 65 kg and a full extension of the drawers to fully have access of what's stored inside.
Blumotion soft closing system guarantees a silent closing throughout the whole life-span of the cabinet: to ensure the highest quality standards, in their laboratories Blum drawers and baskets are closed and open up to 100.000 time each, fully load.
Tops protected from infiltrations
All laminated tops proposed with our kitchens are highly waterproof and come with a protection against infiltrations of water and vapour. A special insulating film will be applied in correspondence of the sink cabinet to protect the sink hole perimeter and completely insulate the material inside the top.
Lastly, inside the sink cabinet and refrigerator column an aluminium bottom is placed to protect the structure from water and other liquids, making the cleaning of the lower parts easier.
Stainless steel plate racks
All plate rack wall units are equipped as a standard with stainless steel plate racks and a plastic water drain tray. This guarantees a long life span and an easy cleaning of each component.
Manual combination of the wooden doors
diotti.com kitchen manufacturing process includes also a manual check performed by specialised professionals to combine and improve the merely mechanical steps of the production.
In particular for Dori model, characterised by a solid wood door, the combination of the single doors is made by hand in order to match the natural wood grains and craft a kitchen which is perfectly homogeneous and well balanced from the point of view of the texture and colour.
Sturdy kitchens made to last through time
Our Kitchens are made from structures that are designed and tested to guarantee the utmost sturdiness and resistance through time: that's why sides, bottoms and tops of each element (cabinets, wall units and columns) are assembled by using 12 wooden pins per side.
Furthermore each shelf is equipped with brackets to ensure a solid fitting to the structure, avoiding the risk of tipping over the shelf.
Differently to other kitchens that travel flat-pack, all diotti.com Kitchens components travel pre-assembled: the user will only need to put the elements one next to the other and link cabinets, columns and wall units together with the hardware.
